Sandblasting Masking Tape

Sandblasting masking tape protects surfaces from fast sand grains. Workers use it to make frosted patterns on glass. The tape must stop the sand from breaking through. The edge must stay sharp. And no glue should remain after peeling. Regular tape cannot do this. It breaks easily. Our product is made for this hard job. The backing is not paper. It is hard PVC film or fiberglass cloth. The thickness can go up to 0.9mm. It acts like armor for the glass or metal below. We have a client who does deep glass carving. The sand hits very hard. Our 0.2mm thick PVC tape solved their problem. The edge stayed clean. The pattern looked sharp.

The thickness of this sandblasting masking tape ranges from 0.08mm to 0.91mm. For light blasting or shallow etching, use about 0.09mm. For deep carving, use 0.13mm to 0.22mm or more. The width goes from 5mm to 1400mm. The length is 10m, 20m, or 50m. Colors are yellow, green, and off-white. These bright colors are easy to see in a blasting workshop. Workers can align the tape quickly. Our product supports computer cutting. You can cut your design on the tape. Then peel off the parts you want to blast. Production takes about 10 working days. Minimum order is 5000 square meters. You can mix different thicknesses and widths. We give free samples. You can run your own blasting test. We offer a 3-month warranty.