Before application, clean the bonding surfaces to remove oil, dust, and other impurities. After peeling off the release paper, press the tape with even pressure to avoid localized air pockets. Allow the adhesive to stand for 24 hours after bonding to achieve optimal strength, avoiding any impact during this period. Special care should be taken: avoid violently opening the box to prevent tearing of the adhesive layer; store in an environment with a temperature between 5°C and 30°C, away from direct sunlight and corrosive gases.
Compared to ordinary double-sided tape, this model achieves high initial tack and strong holding power through optimized molecular structure, with adhesive layer thickness uniformity controlled within ±0.01mm, reducing bonding deviation. However, its limitations include: weaker adaptability to curved surfaces, requiring the use of specialized fixtures; and the potential for accelerated aging due to prolonged exposure to ultraviolet light, necessitating the addition of a UV protective layer depending on the application scenario.